Leofoto LR-60 Dubai | Lever Release Arca Clamp + QP-70N Plate [مشبك أرسا سويس بإطلاق سريع]

The Leofoto LR-60 Dubai is available at AED 325 at CamCity — bundled with the QP-70N plate — and it solves the single most frustrating problem in field photography: losing the shot because you are still unscrewing a clamp knob. One flip of the lever and your camera seats and locks in under a second. One flip to release. If you are shooting weddings at Atlantis, wildlife at Ras Al Khor, or corporate events across DIFC, the difference between a twist-knob clamp and the LR-60’s lever system is the difference between getting the frame and missing it. Every Leofoto LR-60 Dubai unit at CamCity is genuine stock — not sourced from unverified marketplaces with no service behind them.

---

What the LR-60+QP-70N System Does

Lever Release: One Flip, Camera On; One Flip, Camera Off

The LR-60’s lever mechanism locks the QP-70N plate — and your camera — with a single downward flip. No knob to turn, no incremental tightening to judge. The lever either locks or it doesn’t; there is no ambiguous “almost tight” that causes camera drop. Professional wedding and event photographers in particular report this as the upgrade that changes their on-location workflow permanently. Switching from landscape to portrait with an L-bracket takes under two seconds with the lever; it takes 8–10 seconds with a screw knob during which you lose the shot.

Adjustable Arca-Swiss Width — Allen Key Included

The LR-60 features a side-mounted width adjustment accessed via the included Allen wrench. This matters because not all Arca-Swiss dovetails are machined to the same width — slight variations exist between Leofoto, Really Right Stuff, Kirk, and third-party plates. The Allen adjustment lets you dial the clamp’s jaws to fit your specific plate perfectly, eliminating the plate rattle that cheaper fixed-jaw lever clamps develop over time. Set it once for your QP-70N plate; it stays set.

QP-70N Plate: 70mm, Rubberised, Dual Safety Stops

The included QP-70N plate is 70mm long, 38mm wide, and 10mm thick — long enough for a mid-frame grip point on a Sony A7 series, Canon R6, or Nikon Z6 body. Two rubberised traction strips prevent camera rotation on the plate under load. Dual safety stop screws prevent the plate from sliding out of an open clamp accidentally. The 1/4″–20 camera screw features a tightening knob you can seat by hand to camera-base torque — no coin or screwdriver needed in the field.

---

Who Should Buy the Leofoto LR-60 in the UAE

Wedding and portrait photographers shooting multiple locations across Dubai in a single day — Burj Al Arab exteriors, beach setups at JBR, indoor receptions at Dubai venues. Every location change involves mounting and unmounting the camera from the tripod. The LR-60 converts that from a 10-second knob exercise to a one-second lever flip per camera change.

Wildlife and bird photographers at Ras Al Khor Flamingo Sanctuary and Al Qudra Lakes who shoot with long telephoto lenses and need rapid orientation switching. When the flamingo flock lifts and you need portrait crop immediately, you cannot afford to fumble with a screw knob.

Videographers and content creators running gimbal + tripod hybrid setups, who need a fast, repeatable way to move a camera between rigs without losing zero-point. The QP-70N plate stays on the camera body permanently; the LR-60 clamp goes on any rig. Move in one flip.

Existing Leofoto tripod owners — if you have a Leofoto LH-40, LH-47, LH-55, or any Arca-compatible ball head with a standard screw clamp, the LR-60 replaces that clamp directly via the 3/8″ mounting hole. You keep your tripod; you upgrade only the clamp. This is the lowest-cost professional upgrade available for any Leofoto system.

---

Why Buy the Leofoto LR-60 Dubai From CamCity

CamCity is a Dubai-based professional camera retailer with a showroom at Al Khaleej Centre. You can bring your existing tripod head into our showroom and physically test whether the LR-60 threads onto your 3/8″ or 1/4″ boss before you commit. No UAE online seller offers that — and for a clamp that must fit your specific head precisely, it matters.

Every Leofoto LR-60 Dubai unit we sell comes with the QP-70N plate, Allen wrench, and the 3/8″-to-1/4″ bushing reducer — the complete kit, not just the clamp body. If you need to confirm compatibility with your specific ball head model before purchasing, message us on WhatsApp and our team will verify it for you within minutes.

For the full range of Leofoto clamps and accessories, browse all Leofoto accessories at CamCity. For official technical specifications, see the Leofoto LR-60 product page.

If you are building a complete quick release system — LR-60 clamp, L-bracket for your camera body, and additional plates — message us and we will specify the exact combination for your rig before you spend a dirham on anything that might not fit.